Loading... Please wait...

SLI Mechanical Heavy Weight Bars

logosimonliu.jpg

Simon Liu, Inc. highly hand-crafted Mechanical Stretchers are made in solid basswood in Tongue & Groove L-Shape construction. It features Tite-Joint ® fastener and two guiding pins for the connecting miter and butt joint. Each perimeter bar comes with one set of fastener and two guiding pins, and each crossbar comes with two sets of fasteners and four guiding pins.

Keying is limited but the joints are stronger if keying is done properly. Wood shims are highly recommended for keying. After the proper tension is achieved, place wood shims between the hardware and guiding pins to hold the tension, then tighten the hardware to stabilize the joint.

Heavy Duty Profile:
1-1/2" thick x 3" bar width.  Deep profile provides approximately 3/4" clearance between the canvas and the perimeter's body.

heavydutydetail.jpg

Crossbar:
Because of the overlap joints, crossbar configuration must be specified when ordering crossbars.  Configurations include: Single Crossbar, Top Crossbar, and Bottom Crossbar.

Crossbar Requirment:

Stretcher Bar Length
Required Crossbar
10" - 35"
0 Crossbar Required
36" - 65"
1 Crossbar on Each Length
66" - 96"
2 Crossbars on Each Length


Crossbar Configuration:

Stretcher Crossbar Crossbar Configuration
5 Members Stretcher 1 Single Crossbar
 
 
6 Members Stretcher 1 Top & 1 Bottom Crossbars
   
   
Unusual 6 Members Stretcher 2 Single Crossbars
 
 
 
7 Members Stretcher 1 Top & 2 Bottom Crossbars
   
   
   
8 Members Stretcher 2 Top & 2 Bottom Crossbars
     
     
     


    There are no products in this category.

Due to inherent differences in computer monitors, colors displayed on this page may not accurately represent the actual color.

Newsletter